Blister Packing Machine
It is suitable for plastic thermoforming and aluminum cold forming blister packaging.
Blister
Packing Machine
The characteristics of Blister Packaging Machine
· It is suitable
for plastic thermoforming and aluminum cold forming blister
packaging.
· The pursuit of
detail perfection is evident throughout the design and production process.
· All the main parts are made of premium stainless steel and alu-alloy
material, and machined by advanced high precision CNC tooling
machines.
· Exquisite Camber transparent cover (assures safe operation) and special
surface treatment of stainless steel adds to its elegance.
· The machine can achieve 180 minutes of uninterrupted production thanks to a
forming material reel of up to 600mm in diameter and a waste material trimming
cutter (optional).
· Equipped with integrated forming material splicer and automatic format
positioning system to achieve straightforward format changeovers.
· Using a fast lock method enables replacement of lidding material easily
within 10 seconds.
· Separation of drive and operating zones are in compliance with pharmaceutical
GMP requirements.
· Material drag system adopts a precise servo motor to achieve stable, accurate
running and allows blister length to be set freely.
· Sealing cylinder is placed inside the machine’s body to improve machine
structure
· Add a
perforation station, to separate the perforation from the embossing station. Conventionally,
perforation and embossing remain in one station, but this will influence the
clarity of each.
· This machine
can be custom-built to produce plastic thermoformed trays with maximum forming
depth reaching 50mm.
Detail pictures as
follow：
1. Equipped with integrated forming material splicer.
2. The
upper and lower plates adopt contact heating method that significantly reduces
the forming temperature. Thus the shrinkage, deforming of packaging material
and power consumption are minimized.
3. Dedicated feeder for liquids
4. Liquids are filled by the feeding mouths to the formed blisters.
5. In the sealing station, when the machine stops, the heating sealing mould can rise up automatically, to prevent hot air from getting into the blister pockets, so that medicine effectiveness is preserved.
6. All of the guide rollers are labeled with a sequence number and placement direction, making it very easy to guide the film and lid foil through the machine.
7. The material drag system adopts a precise servo motor to achieve stable, accurate running. The blister length can be set freely through Touch Screen User Interface, which reduces the time for a format changeover.
8. The
sealing, embossing, dragging and cutting stations.
9. The waste material trimming cutter (optional).
10. Pinhole
detection system for quality assurance of blister packaging (optional).
Main Technical
Parameters:
Max.
Speed: alu/pvc
50 punches/min.
Appox 9000 capsules/hour
Max. Forming Area:
245×152mm
Max Forming Depth:
12mm
Material:
Max. width 260mm
Machine Power:
9.6kw
Machine Dimension:
4200×740×1700mm
Machine Weight:
1800kg